3
: Zero key, press this key to return the display to
zero if a small weight reading is left while
unloaded/empty.
VII. Counting function
Sampling
1.
Press
key
,
the display will show
“
Cnr10pcs
”
(means sample size is 10 pcs)
2.
Press the
key again and again, 10
、
20
、
50
、
100 pcs will
appear in succession. Stop at the one you want to use.
3.
Put the exact quantity of samples as desired on the pan
and press
,
the determined sample size will be shown.
4.
Keep adding objects to be counted on the pan, the total
number of the objects will be displayed.
※
If the unit weight is too small for the counting resolution,
“ ”
will be shown.
VIII. Operations
●
Weight units
Press
key to choose the preset weight units
g
,
ct
&
ozt.
●
Tare function
4
Put a container on the pan and press when the display
reading is stable.
The tare weight will be stored into memory
and display will be brought to zero. “ ” indication in the
display will appear. The weight will be displayed as net
weight. To cancel the tare mode, press when no load
on the weighing pan.
※
Tare range : Up to balance’s maximum capacity.
●
Zero function
Press key to return the display to the center of zero if the
zero Shifts during operation.
※
Zero range : ± 2% of max. capacity
Ⅸ
. Error messages
When the display shows “
”
it means that the
balance is overloaded. Please remove the object from the pan immediately so
as to avoid damage to the load sensor inside the balance.
