4.
Set up the whole house big blue filter to match the flow di-
rection. The caps are marked “In” and “Out” on the top of the
housing or from left to right. These systems come pre-assem-
bled. However, if your flow direction is right to left, the brack-
et must be removed from the system and needs to be turned
around 180 degrees then reconnected.
5.
The inlet plumbing will be attached to the “In” port on the
filter system. The outlet plumbing from the whole house big
blue filter system will be attached to the distribution system
via the “Out” port. A bypass pipe and shutoff valve, Inlet and
Outlet shutoff valves and gauges may be installed at this time.
NOTE:
Do not use sealants on any of the threads as this will ex-
pand and will cause cracks and will damage the whole house
black caps. Please only use thread tape.
Содержание MWF BIG BLUE WHOLE HOUSE WATER FILTRATION SYSTEMS
Страница 2: ...Parts Dimensions ...
Страница 4: ...Easy Installation Guide CLICK HERE TO WATCH THE VIDEO CLICK HERE TO WATCH THE VIDEO ...
Страница 12: ...How to Change Cartridges CLICK HERE TO WATCH THE VIDEO 1 Shut off the water supply ...
Страница 17: ...For Customer Service Call us at 1800 769 300 My Water Filter Pty Ltd ...