Parking brake
The stroller is equipped with a parking brake on the rear
axle. To engage the brake press its pedal (Fig. 10). To re-
lease the brake, raise the pedal. The brake is not to use
for slowing down the stroller, please just use it when the
stroller stopped.
Attention! Make sure that the brake is released before
the ride. Always block the brake if you park the stroller
on uneven ground.
Adjusting the handle height
The stroller has a height-adjustable handle. To adjust,
press the round push buttons located on both sides of the
handle and set it to the desired height (Fig. 11, 12).
Folding the stroller
To fold the stroller, pull the two levers on both sides in
your direction (Fig. 13). Now push the stroller down, so the
frame folds up (Fig. 14, 15). You can fold the stroller with
the seat in front position.
Assembly and disassembly of the baby tub
To attach the baby tub, press it on to the stroller frame so
that the click systems on the sides of the baby tub engage
with the frame (Fig. 16, 17). The blocking takes place au-
tomatically. To remove the baby tub, press the snaps on
the click system on both sides of the baby tub and pull the
baby tub up.
Attention! Make sure that the baby tub is properly se-
cured before use.
Louvers on the baby tub
The louvers on the cover of the baby tub can come into use
by opening the zip and extending the cover.
10
12
14
16
11
13
15
17
