Unfolding the stroller
To unfold, place the stroller flat on the floor (Fig. 1,2), loos-
en the frame lock on the side and pull the handle upwards
until the folding mechanism engages (Fig. 3).
Attention! Make sure that the stroller is properly
opened before use.
Assembly of the rear axle
To mount the rear axle, put it together with the brake sys-
tem on the frame until it clicks into place on both sides of
the pushchair (Fig. 4).
Assembly and disassembly of the rear
wheels
To remove the rear wheels, press the button located in the
center of the wheel (Fig. 5) and pull the wheel off the axle.
To re-assemble, press the push-button and slide the wheel
until it engages the axle.
Attention! Before using, make sure that all wheels are
properly mounted.
Assembly and disassembly of the swiveling
front wheels
To mount the front wheels, slide them on the metal pins of
the front supports until they click (Fig. 6). To disassemble
the wheels, press the rectangular push button (Fig. 7) locat-
ed on the front of the wheel joint and remove the wheels
from the front metal pins.
The front wheels are swiveling and have locking devices for
driving straight ahead. To lock the wheels, turn the plastic
ring below the hinge until it snaps into place (Fig. 8).
Suspension in the frame
The VITA unique has an extra suspension in the frame. You
can turn this suspension on and off when pushing the but-
ton on both sides through the frame (Fig. 9).
1
3
5
7
9
2
4
6
8
