page 15
Fitting tips -
Fold it first
(continued)
2. If the connector is high up on the leg then
the board will be nearer to the pushchair.
This will give you more leg room if you are
taller and have a longer stride.
3. If you fit the connector low down
[RECOMMENDED]
then board will be further
away from the pushchair, so you may find
it easier to reach the brakes and may be
more suitable for taller children.
NOTE: If you cannot find a place to fit the connector while the pushchair is in the
folded position, or opening/closing action is obstructed, then you may need to remove
the connectors before you can fold the pushchair.
Storage strap
1. Attach the loop (Q) to the pushchair
handle.
2. Attach the board to the pushchair
(follow assembly and fitting guide).
3. With the board still connected to the
pushchair, fold the board up against the
back of the pushchair. Adjust the strap so
the clip (R) reaches the board.
4. Fold the board against the back of
the pushchair and attach clip to back of
board (S).
ATTENTION:
Do not allow strap to trail on the ground as it may be a trip hazard.
Q
R
S
