page 8
Fitting the board -
General fitting advice
3. Loosen knobs (H). This will allow the two
arms (J) to be rotated and moved in or
out as necessary.
1. Attach the connectors to the legs
of the pushchair. Make sure both
connectors are at the same height and
pull strap (E) as tightly as possible through
the adjuster button (F) (you may need
to wiggle the connector left and right to
achieve this). Tighten safety knob (G) all
the way in ensuring block (B) is tightened
fully against the leg tubing.
2.
For thin/narrow tubing:
• Slide the tube protector (A) to the body
of the connector (C).
• Pull the strap (E) through the adjuster (F)
as tightly as possible.
• Tighten the safety knob (G) fully.
ATTENTION!
Ensure the connectors are
gripping the tube firmly before attaching
the board.
H
A
B
E
G
F
B
C
G
J
J
IMPORTANT: Ensure block (B) is fully retracted. Failure to do so may make it more
difficult when fitting to strollers with thicker leg tubing.
