MXR | Carbon Copy Deluxe Analog Delay
6
USING A EXTERNAL TAP SWITCH
TO TOGGLE MOD BUTTON
1. Connect external tap switch to EXP jack with an instrument
cable.
2. Press and hold MOD button while connecting M292 to
power source, then release button after MOD LED flashes.
3. External tap switch now controls MOD button.
METRONOME IN/OUT FUNCTIONS
FOR MULTIPLE DEVICES
1. Program a positive pulse signal metronome master OUT
by holding down TAP DIV + BRIGHT buttons while connecting
master M292 to power source, then release buttons after
LEDs flash.
2. Program a positive pulse signal metronome slave IN by
holding TAP-BEAT + BRIGHT buttons while connecting slave
M292 to power source, then release button after LEDs flashes.
3. Connect devices via EXP jack with an instrument cable.
4. TAP-BEAT switch or DELAY knob on master M292 controls
tempo beat of both devices. TAP DIV on master M292 has no
effect on metronome master OUT tempo.
5. TAP-BEAT switch on slave M292 selects the TAP DIV used
to divide master tempo beat. Delay knob on slave M292 is
disabled.
ADJUSTING BRIGHTNESS OF TAP DIV
DISPLAY & TAP-BEAT LED
1. Press & hold TAP-BEAT & TAP DIV buttons while connecting
M292 to power source, then release buttons after LEDs flashes.
2. Observe the flashing TAP DIV LED display brightness level.
DELAY knob adjusts brightness from bright to OFF (no flashing).
3. Press TAP DIV button to observe the steady-on TAP DIV LED
display brightness level. DELAY knob adjusts brightness from
bright to dim.
4. Press TAP DIV button to observe the flashing TAP-BEAT LED
brightness level. DELAY knob adjusts brightness from bright to
OFF (no flashing).
5. Press TAP DIV button to repeat the cycle. NOTE: A flashing
LED set to OFF will flash twice, indicating which LED has been
selected.
6. Press TAP-BEAT switch to save brightness settings, or press
BRIGHT button to exit without saving.
OVERRIDE SAVED EXPRESSION PEDAL/
TOGGLE SETTINGS WITH CURRENT KNOB
& BUTTON SETTINGS
1. Press and hold TAP-BEAT switch for at least two seconds
(TAP-BEAT LED restarts blinking if brightness not set to OFF).
Continue holding down TAP-BEAT switch while connecting a
TRS cable to the EXP jack or MONO cable if EXP jack has been
programed to either *TOGGLE SETTINGS function. Release
TAP-BEAT switch at least one second after EXP jack connection.
2. Controllable front panel settings now override both saved
setting configurations.
Advanced Operation (cont.)
