MXR | Carbon Copy Deluxe Analog Delay
5
8. If you haven’t saved overridden settings, you can return
to previously saved settings by power cycling pedal or
disconnecting the cable from EXP jack for 2 seconds and then
reconnecting it.
9. “A” or “B” delay time can be temporarily changed by tapping
a new delay time with external tap switch. NOTE: Selected TAP
DIV setting will apply. Toggling settings with onboard TAP-BEAT
switch automatically erases temporary tapped-in delay time and
recalls saved or overridden settings. Before toggling settings, the
newly tapped in delay time can be saved by holding TAP-BEAT
switch for 2 seconds until all front panel LEDs flash. This will also
save any overridden “A” and “B” settings.
*USING EXTERNAL TAP SWITCH TO TOGGLE
BETWEEN TWO SETTING CONFIGURATIONS
1. Press and hold TAP DIV + MOD buttons while
connecting M292 to power source, then release buttons after
LEDs flash.
2. Connect external tap switch to M292’s EXP jack with an
instrument cable.
3. External tap switch now toggles between A and B setting
configurations. Previously saved settings will be automatically
recalled, whether set by expression pedal or by external tap
switch.
4. To override recalled A settings and create a new A
configuration, adjust DELAY, SPEED, and WIDTH knobs and
BRIGHT, TAP DIV, and MOD buttons as desired. Note: MIX and
REGEN knobs cannot be controlled with external tap switch.
5. Press external tap switch to recall B configuration. To override
and create a new “B” configuration, adjust knobs and buttons
as mentioned above.
6. External tap switch now toggles overridden A and B setting
configurations.
7. Press & hold TAP-BEAT switch for 2 seconds until all
front-panel LEDs flash to save all overridden settings. These
new settings will be automatically recalled upon power up or
connecting an instrument cable to M292’s EXP jack.
8. If you haven’t saved overridden settings, you can return
to previously saved settings by power cycling pedal or
disconnecting the instrument cable from EXP jack for 2
seconds and then reconnecting it.
9. A or B delay time can be temporarily changed by tapping
a new delay time with TAP-BEAT switch. NOTE: Selected TAP
DIV setting will apply. Toggling settings with external tap switch
automatically erases tapped-in delay time and recall saved or
overridden settings. Before toggling settings, the newly tapped
in delay time can be saved by holding TAP-BEAT switch for 2
seconds until all front panel LEDs flash. This will also save all
overridden A and B settings.
USING A EXTERNAL TAP SWITCH
TO CONTROL BRIGHT BUTTON
1. Press and hold BRIGHT button while connecting M292 to
power source, then release button after BRIGHT LED flashes.
2. Connect external tap switch to EXP jack with an instrument
cable.
3. External tap switch now controls BRIGHT button.
USING A EXTERNAL TAP SWITCH
TO CONTROL TAP DIV BUTTON
1. Press and hold TAP DIV button while connecting M292 to
power source, then release button after TAP DIV LED display
flashes.
2. Connect external tap switch to EXP jack with an instrument
cable.
3. External tap switch now controls TAP DIV button.
Advanced Operation (cont.)
