MXR | Carbon Copy Deluxe Analog Delay
4
RECOMMENDED ACCESSORIES
DVP3 Volume (X)
™
Pedal or DVP4 Volume (X)
™
Mini Pedal
M199 MXR Tap Tempo Switch
USING EXPRESSION PEDAL TO SWEEP
BETWEEN TWO DIFFERENT SETTING
CONFIGURATIONS
1. Connect expression pedal to M292’s EXP jack with a TRS
cable. Expression pedal will sweep between “A” and “B” setting
configurations. Previously saved settings will be automatically
recalled.
2. To override recalled “A” settings and create a new “A”
configuration, set expression pedal rocker to its HEEL-DOWN
position and adjust DELAY, SPEED, and WIDTH knobs and
BRIGHT, TAP DIV, and MOD buttons as desired. Note: MIX and
REGEN knobs cannot be controlled with expression pedal.
3. To override and create a new “B” configuration, set expression
pedal rocker to its TOE-DOWN position and then adjust
aforementioned knobs and buttons as desired.
4. Hold TAP-BEAT switch for 2 seconds until all front panel LEDs
flash to save settings. Settings will be preserved when pedal is
disconnected from power source or from expression pedal.
5. Moving rocker back and forth will move smoothly sweep
between “A” and “B” settings. BRIGHT, TAP DIV, and MOD
settings will toggle at rocker’s half way position.
6. Settings can be overridden by simply re-adjusting
aforementioned knobs and buttons. To return to saved settings,
disconnect TRS cable for 2 seconds and then reconnect it.
7. Delay time can be temporarily changed by tapping a new
delay time with TAP-BEAT switch. NOTE: The selected TAP DIV
setting will apply. Moving the Expression pedal will automatically
recall saved or overridden settings. Hold TAP-BEAT switch for 2
seconds until all front panel LEDs flash to save the new tapped
in delay time to “A” or “B” setting depending on rocker position.
This will also save overridden knob and button settings to the
same position.
USING A EXTERNAL TAP SWITCH TO SET
TEMPO
1. Press and hold TAP-BEAT switch while connecting M292 to
power source, then release switch after TAP-BEAT LED flashes.
2. Connect external tap switch to M292’s EXP jack with an
instrument cable.
3. External tap switch now acts as tap tempo control along
with TAP-BEAT switch.
*USING EXTERNAL TAP SWITCH TO
CONTROL TEMPO & TAP-BEAT SWITCH
TO TOGGLE BETWEEN TWO SETTING
CONFIGURATIONS
1. Press & hold TAP-BEAT + TAP DIV buttons while
connecting M292 to power source, then release buttons after
LEDs flash.
2. Connect external tap switch to M292’s EXP jack with an
instrument cable.
3. External tap switch now acts as tap tempo control, and
onboard TAP-BEAT switch now toggles between “A” and
“B” setting configurations. Previously saved settings will be
automatically recalled.
4. To override recalled “A” settings and create a new “A”
configuration, adjust DELAY, SPEED, and WIDTH knobs and
BRIGHT, TAP DIV, and MOD buttons as desired. Note: MIX and
REGEN knobs cannot be controlled with the onboard TAP-BEAT
switch.
5. Press onboard TAP-BEAT switch to recall “B” configuration.
To override and create a new “B” configuration, adjust knobs
and buttons as mentioned above.
6. Onboard TAP-BEAT switch now toggles overridden A and B
setting configurations.
7. Press & hold TAP-BEAT switch for 2 seconds until all front-
panel LEDs flash to save all overridden settings. These new
settings will be automatically recalled upon powering up or
connecting a cable to M292’s EXP jack.
Advanced Operation
