Before you Start
These instructions contain all the necessary installation information for your MX Douche Bidet Kit.
Please read these instructions carefully and check all the components for any sign of damage
before starting your installation.
The installation must be carried out by a suitably competent person.
Conveniently situated service valves to the inlet supply must be fitted as an independent method of
isolating the unit for maintenance or servicing.
Please note that you may require 13mm copper pipe and fittings to install the unit.
(NOT SUPPLIED)
Once the supply pipe work has been fitted flush through to remove any debris form entering
the valve and spray head.
Operating Pressures (Bar)
Min
Max
Square Thermostatic Douche Bidet Kit
0.2
5.0
Maximum static water pressure for this unit is10 bar.
Technical Help
Technical Service Line: 0845 505 2211 / 01684 293311 Open Mon–Fri 9am–5pm
