18
The measurement of figure 18 corresponds to memory position 1 and was performed on
October 20 at 10:17, systolic pressure was 116 mmHg, diastolic pressure was 78 mmHg
and pulse was 82 beats per minute.
Notes:
•
The memories will remain stored even if the batteries are not installed. However, the
analysis of the last three measurements will be erased.
•
If there are no stored measurements, the display will show the digits "
0
".
•
At any time, you can exit the memory mode by pressing the " " button, or leave 2
minutes without pressing any buttons.
CLEAR MEMORY
To erase all the memory locations of the four users (
U1
,
U2
,
U3
and
U4
) access the memory
and then press and hold the
M
button for 3 seconds.
Содержание MX-CP2395
