Mx Onda MX-CP2395, Инструкция по эксплуатации

Страница: 12 / 34

12
CUFF SWATHING
1.
Place cuff 1-2cm above elbow joint.
-
Place palm upside and let it be parallel with rubber tube
-
Measuring at the same arm each time
-
Measuring on the bare arm, especially for the feeble pulse. If
measuring of clothing should be thin and smooth
-
When the cuff is dirty, detach it from the equipment, wash
the cuff by hand with proper detergent and resin it in the
enough cold water. Dry in air. Never iron it.
2.
Turn the cuff end outward and tighten it by pulling through the
metal loop. Then press the loop onto the surface of cuff.
3.
To make the cuff more firmly, use the free hand to move and
press it.
- Do not place the cuff too loose or too tight; spacing of a
finger is appreciated.
- If the arm is very thin, please raise elbow joint slight when
winding cuff.
Sitting Measurement
1.
Sit upright.
2.
Place arm horizontally on the chair or table with the palm upside.
3.
Cuff position should be at the same level as the heart.