3
BEFORE CONNECTING THE APPLIANCE
Your security is important for us. Please read all safety
instructions carefully before using and installing the range hood
and keep this user and installation manual for future reference.
After removing the packaging, check that the appliance is not
damaged. If in doubt do not install it and contact technical
support staff.
Keep packaging materials (bags, polystyrene pieces, etc.) out
of the reach of children, as they are a potential source of
danger.
Check that the voltage of your electrical outlet is 220-240 V ~
50 Hz and that it is grounded. The electrical safety of this
appliance is guaranteed only if it is connected to a socket with
an effective earth connection, as foreseen by the safety
regulations in force.
The manufacturer declines any responsibility for damages
derived from the lack of grounding in the installation. When in
doubt, consult a professional.
This appliance must be connected to a circuit that incorporates
an omnipolar isolation switch that provides a total
disconnection from the electrical network.
If the electrical connection is made with the mains plug and
this is accessible after installation, it will not be necessary to
install a circuit that incorporates an isolation switch.
Before installing the extractor hood, consult the regulations
and legal provisions regarding the current regulations on air
and smoke evacuation in your area.
To improve the evacuation and performance of the cooker
hood, we recommend that the flexible tube be as short as
possible and avoid right angles.
The lower part of the hood must be at a minimum height of 65
cm from the hob. If a gas hob is to be used and a greater
distance is indicated in its installation instructions, this distance
must be respected.
