46
User Manual WMF presto!
Care
Use the multitool from the accessories.
Turn the thread on the brewing unit head counter-
clockwise (illustration 3) until the wiper is in the
forward position
Push the springs outwards over the edge and unlock
(illustration 4)
Swing the insertion chute upwards
Clean the brewing filter under running water or with
a cloth
Remove residual coffee grounds using a paint-brush or
scrubber
Rinse the brewing unit under running water
Never clean the brewing unit in a dishwasher and never
use any cleaner additives.
Dry the brewing unit with a cloth
Allow to dry completely before reinstalling in the coffee
machine.
Remove coffee grounds residue from the chute.
Wipe out the coffee grounds towards the front or suck
out using a vacuum cleaner
Refit the brewing unit after it has been dried.
Replace springs in insertion unit (illustration 4)
Hold the pusher compressed and replace the brewing
unit in the chute against rear wall
Push brewing unit upwards until it engages in the lock
Replace grounds container
Close the adjustable screen
If the brewing unit cannot be replaced without
resistance: turn thread on the brewing unit head slightly
to the left or right with the multitool until the brewing
unit slides into the guide.
Never use force.
Illustration 3
Risk to the machine.
Follow the manual.
Illustration 4
Brewing filter
Risk to the machine.
Follow the manual.
