7
HAE31520N - HAE32520N - HAE32515N - NLFREN - v1.0 - 18092017
EN
4 Use
• Pull out the cable at desired length and stop then it will be locked. To release it just pull out more length.
• Need a retraction after work, just pull out more length, then let it go.
• To adjust the cable length during the work, pull out a little more and let it go back then pull out again to desired length and
stop.
•
Always hold the cable during its retraction to prevent a retraction with quick speed, otherwise some parts or things around
may be damaged due to the quick speed.
•
It is strongly suggested that do not pull all the cable out during the work to protect and extend the life of spring.
5 Trouble shooting
•
The cable may get dirty during the work, if not be cleaned, cable would be tangled and hard to be retracted, so please
clean the cable with a soft wet cloth (turn off the power first), then let the cable retract.
If wipe the cable with a little lubrication, the retraction would be much more better.
• If sometimes the cable could not be retracted, please pull out the cable again for some more length then retract, repeat the
action till the cable is retracted.
copyrighted
document
- all
rights
reserved
by
FBC
