40
M1.2.HB240-HB240M.NLFREN 21112017
EN
3�4 Items to be checked after installation
Check items
YES
NO
1
Are the posts vertical to the floor?
2
Are the two posts paralleled?
3
Is the oil hose well connected?
4
Is the steel cable well connected?
5
Are all lifting arms well fixed?
6
Are electrical connections right?
7
Are the rest joints firmly screwed?
8
Are all items need lubricating added with grease?
4 Operation instructions
4�1 Precautions
•
Check all the joints of oil hose. Only when there is no leakage, the lift can start work.
•
The lift, if its safety device malfunctions, shall not be used.
•
The machine shall not lift or lower an automobile if its center of gravity is not positioned midway of the swing arms.
Otherwise, we as well as our dealers will not bear any responsibility for any consequence resulted thereby.
•
Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
•
When lifting arms rise to the desired height, switch off the power at once to prevent any mal-operation done by
unconcerned people.
•
Make sure the safety lock of the lift is engaged before start working under the vehicle and no people under the vehicle
during lifting and lowering process.
4�2 Flow chart for operation
USER’S GUIDE V1.0 201511
- 12 -
Press UP button
Motor drives the gear pump work
Cylinder piston drives the chain work
Chain drives the carriage rise
The lift is raised
Start
Start
Press UP button to raise the carriage 5cm
Pull the unlocking steel cable at both sides
The lift is lowered
Press the unloading handle
3.4 Items to be checked after installation.
S/N
Check items
YES
NO
1
Are the posts vertical to the floor?
2
Are the two posts paralleled?
3
Is the oil hose well connected?
4
Is the steel cable well connected?
5
Are all lifting arms well fixed?
6
Are electrical connections right?
7
Are the rest joints firmly screwed?
8
Are all items need lubricating added with grease?
OPERATION INSTRUCTIONS
4.1 Precautions
4.1.1 Check all the joints of oil hose. Only when there is no leakage, the lift can start work.
4.1.2 The lift, if its safety device malfunctions, shall not be used.
4.1.3 The machine shall not lift or lower an automobile if its center of gravity is not positioned midway of the swing arms.
Otherwise, the we as well as our dealers will not bear any responsibility for any consequence resulted thereby.
4.1.4 Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
4.1.5 When lifting arms rise to the desired height, switch off the power at once to prevent any mal-operation done by
unconcerned people.
4.1.6. Make sure the safety lock of the lift is engaged before start working under the vehicle and no people under the vehicle
during lifting and lowering process.
4.2 Flow chart for operation
Raising
Lowering
copyrighted
document
- all
rights
reserved
by
FBC
