manualshive.com logo in svg

MW TOOLS 195330000, Руководство пользователя, Страница: 27 / 29

Поделиться
Скачать
MW TOOLS 195330000 Скачать руководство пользователя страница 27

 

27

EN

M1.1.MWM100.NLFREN   23082018

4�5  Test diodes

1. 

Connect the black test lead to the COM terminal and the red lead to the VΩHz terminal.

2.  Turn the rotary switch to       , press SEL twice to toggle to the diode mode.
3.  Connect the red probe to the anode side and the black probe to the cathode side of the diode being tested.

4. 

Read the forward bias voltage value on the display.

5.  If the polarity of the test leads is reversed with diode polarity or the diode is broken, the displays shows “OL”.

*Do not input voltage at this setting�

*Disconnect circuit power and discharge all capacitors before you test diode�

4�6  Measure capacitance

1. 

Connect the black test lead to the COM terminal and the red lead to the VΩHz terminal.

2.  Turn the rotary switch to       , press SEL three times to toggle to the capacitance mode.
3.  Connect the red probe to the anode side and the black probe to the cathode side of the capacitor being tested.
4. 

Read the measure

d capacitance value on the display once the reading is stabilized.

*Disconnect circuit power and discharge all capacitors before you test capacitance�

4�7  Measure frequency

1. 

Connect the black test lead to the COM terminal and the red lead to the VΩHz terminal.

2.  Turn the rotary switch to        (applies to low frequency with high voltage), press SEL twice to toggle to the frequency mode, 

or turn the rotary switch to     (applies to high frequency with low voltage).

3.  Touch the probes to the desired test points.

4. 

Read the measured frequency value on the display.

4�8  Measure duty cycle

1. 

Connect the black test lead to the COM terminal and the red lead to the VΩHz terminal.

2.  Turn the rotary switch to        (applies to low frequency with high voltage), press SEL three times to toggle to the duty cycle 

mode, or turn the rotary switch to       (applies to high frequency with low voltage), press SEL once to toggle to the duty 

cycle mode.

3.  Touch the probes to the desired test points.

4. 

Read the measured duty cycle value on the display.

4�9  Measure temperature

1. 

Connect the black thermocouple probe to the COM terminal and the red probe to the VΩHz terminal.

2.  Turn the rotary switch to         , press SEL three times to measure temperature (°C), or press SEL four times to measure 

temperature (°F).

3.  Touch the probes to the desired test points.

4. 

Read the measured temperature on the display.

*Do not input voltage at this setting�

2. Turn the rotary switch to

or

.

3. Press SEL to toggle between AC/DC.
4. Break the circuit path to be measured, connect

the test leads across the break and apply
power.

5. Read the measured current on the display.

Measure Resistance

1. Connect the black test lead to the COM

Terminal and the test lead to the V

Ω

Hz

Terminal.

2. Turn the rotary switch to

, and the display

will show

“

”

.

3. Touch the probes to the desired test points of

the circuit to measure the resistance.

4. Read the measured resistance on the display.

11

*Do not measure current that exceeds the extremes

as indicated in the Specifications.

*Use the A mA Terminal and the

Mode when

you are measuring an unknown current. Then

switch to the

VΩHz

Terminal and the

Mode if

necessary.

*Do not input voltage at this setting.

2. Turn the rotary switch to

or

.

3. Press SEL to toggle between AC/DC.
4. Break the circuit path to be measured, connect

the test leads across the break and apply
power.

5. Read the measured current on the display.

Measure Resistance

1. Connect the black test lead to the COM

Terminal and the test lead to the V

Ω

Hz

Terminal.

2. Turn the rotary switch to

, and the display

will show

“

”

.

3. Touch the probes to the desired test points of

the circuit to measure the resistance.

4. Read the measured resistance on the display.

11

*Do not measure current that exceeds the extremes

as indicated in the Specifications.

*Use the A mA Terminal and the

Mode when

you are measuring an unknown current. Then

switch to the

VΩHz

Terminal and the

Mode if

necessary.

*Do not input voltage at this setting.

3. Connect the red probe to the anode side and

the black probe to the cathode side of the
capacitor being tested.

4. Read the measured capacitance value on the

display once the reading is stablized.

Measure Frequency

1. Connect the black test lead to the COM

Terminal and the red lead

to the V

Ω

Hz

Terminal.

2. Turn the rotary switch to

(applies to low

frequency with high voltage), press SEL twice
to toggle to the Frequency Mode; or turn the
rotary switch to

(applies to high frequency

with low voltage).

3. Touch the probes to the desired test points.
4. Read the measured frequency value on the

display.

14

*Disconnect circuit power and discharge all

capacitors before you test capacitance.

3. Connect the red probe to the anode side and

the black probe to the cathode side of the
capacitor being tested.

4. Read the measured capacitance value on the

display once the reading is stablized.

Measure Frequency

1. Connect the black test lead to the COM

Terminal and the red lead

to the V

Ω

Hz

Terminal.

2. Turn the rotary switch to

(applies to low

frequency with high voltage), press SEL twice
to toggle to the Frequency Mode; or turn the
rotary switch to

(applies to high frequency

with low voltage).

3. Touch the probes to the desired test points.
4. Read the measured frequency value on the

display.

14

*Disconnect circuit power and discharge all

capacitors before you test capacitance.

3. Connect the red probe to the anode side and

the black probe to the cathode side of the
capacitor being tested.

4. Read the measured capacitance value on the

display once the reading is stablized.

Measure Frequency

1. Connect the black test lead to the COM

Terminal and the red lead

to the V

Ω

Hz

Terminal.

2. Turn the rotary switch to

(applies to low

frequency with high voltage), press SEL twice
to toggle to the Frequency Mode; or turn the
rotary switch to

(applies to high frequency

with low voltage).

3. Touch the probes to the desired test points.
4. Read the measured frequency value on the

display.

14

*Disconnect circuit power and discharge all

capacitors before you test capacitance.

3. Connect the red probe to the anode side and

the black probe to the cathode side of the
capacitor being tested.

4. Read the measured capacitance value on the

display once the reading is stablized.

Measure Frequency

1. Connect the black test lead to the COM

Terminal and the red lead

to the V

Ω

Hz

Terminal.

2. Turn the rotary switch to

(applies to low

frequency with high voltage), press SEL twice
to toggle to the Frequency Mode; or turn the
rotary switch to

(applies to high frequency

with low voltage).

3. Touch the probes to the desired test points.
4. Read the measured frequency value on the

display.

14

*Disconnect circuit power and discharge all

capacitors before you test capacitance.

2. Turn the rotary switch to

, press SEL three

times to measure temperature(

℃

), or press

SEL four times to measure temperature(

℉

).

3. Touch the probes to the desired test points.
4. Read the measured temperature on the

display.

Test NCV

1. Turn the rotary switch to

.

2. Hold the product and move it around, the built-

in beeper will beep when the inner sensor
detects AC voltage nearby. The stronger the
voltage is, the quicker the beeper beeps.

16

*Do not input voltage at this setting.

copyrighted 

document 

- all 

rights 

reserved 

by 

FBC

Содержание 195330000






























Отзывы:

Нет отзывов