MW TOOLS 195330000 Скачать руководство пользователя страница 26

Страница: 26 / 29

M1.1.MWM100.NLFREN 23082018

4 Measurements instructions

4�1 Measure AC/DC voltage

Connect the black test lead to the COM terminal and the red lead to the VΩHz terminal.

2. Turn the rotary switch to or to .
3. Press SEL to toggle between AC/DC.

4. Touch the probes to the correct test points of the circuit to measure the voltage.

Read the measured voltage on the display.

*Do not measure voltage that exceeds the extremes as indicated in the specifications.

*Do not touch high voltage circuit during measurements�

4�2 Measure AC/DC current

Connect the black test lead to the COM terminal and the red lead to the VΩHz terminal or the A mA terminal (choose

based on the value of the current to be measured).

2. Turn the rotary switch to or .
3. Press SEL to toggle between AC/DC.

4. Break the circuit path to be measured, connect the test leads across the break and apply power.

Read the measured current on the display.

*Do not measure current that exceeds the extremes as indicated in the specifications.

*Use the A mA terminal and the mode when you are measuring an unknown current� Then switch

to the VΩHz terminal and the mode if necessary.

*Do not input voltage at this setting�

4�3 Measure resistance

Connect the black test lead to the COM terminal and the red lead to the VΩHz terminal.

2. Turn the rotary switch to , and the display will show “OL”.
3. Touch the probes to the desired test points of the circuit to measure the resistance.

Read the measured resistance on the display.

*Disconnect circuit power and discharge all capacitors before you test resistance�

*Do not input voltage at this setting�

4�4 Test for continuity

Connect the black test lead to the COM terminal and the red lead to the VΩHz terminal.

2. Turn the rotary switch to , press SEL once to toggle to the continuity mode.
3. Touch the probes to the desired test points of the circuit.

The built-in beeper will beep when the resistance is lower than 50 Ω, which indicates a short circuit.

*Do not input voltage at this setting�

Measurements Instruction

Measure AC/DC Voltage

1. Connect the black test lead to the COM

Terminal and the red lead to the V

Terminal.

2. Turn the rotary switch to

or to

3. Press SEL to toggle between AC/DC.
4. Touch the probes to the correct test points of

the circuit to measure the voltage.

5. Read the measured voltage on the display.

Measure AC/DC Current

1. Connect the black test lead to the COM

Terminal and the red lead to the V

Terminal or the A mA Terminal (choose based
on the value of the current to be measured).

*Do not measure voltage that exceeds the extremes

as indicated in the Specifications.

*Do not touch high voltage circuit during

measurements.

Measurements Instruction

Measure AC/DC Voltage

1. Connect the black test lead to the COM

Terminal and the red lead to the V

Terminal.

2. Turn the rotary switch to

or to

3. Press SEL to toggle between AC/DC.
4. Touch the probes to the correct test points of

the circuit to measure the voltage.

5. Read the measured voltage on the display.

Measure AC/DC Current

1. Connect the black test lead to the COM

Terminal and the red lead to the V

Terminal or the A mA Terminal (choose based
on the value of the current to be measured).

*Do not measure voltage that exceeds the extremes

as indicated in the Specifications.

*Do not touch high voltage circuit during

measurements.

2. Turn the rotary switch to

3. Press SEL to toggle between AC/DC.
4. Break the circuit path to be measured, connect

the test leads across the break and apply
power.

5. Read the measured current on the display.

Measure Resistance

1. Connect the black test lead to the COM

Terminal and the test lead to the V

Terminal.

2. Turn the rotary switch to

, and the display

will show

“

”

3. Touch the probes to the desired test points of

the circuit to measure the resistance.

4. Read the measured resistance on the display.

*Do not measure current that exceeds the extremes

as indicated in the Specifications.

*Use the A mA Terminal and the

Mode when

you are measuring an unknown current. Then

switch to the

VΩHz

Terminal and the

Mode if

necessary.

*Do not input voltage at this setting.

2. Turn the rotary switch to

3. Press SEL to toggle between AC/DC.
4. Break the circuit path to be measured, connect

the test leads across the break and apply
power.

5. Read the measured current on the display.

Measure Resistance

1. Connect the black test lead to the COM

Terminal and the test lead to the V

Terminal.

2. Turn the rotary switch to

, and the display

will show

“

”

3. Touch the probes to the desired test points of

the circuit to measure the resistance.

4. Read the measured resistance on the display.

*Do not measure current that exceeds the extremes

as indicated in the Specifications.

*Use the A mA Terminal and the

Mode when

you are measuring an unknown current. Then

switch to the

VΩHz

Terminal and the

Mode if

necessary.

*Do not input voltage at this setting.

2. Turn the rotary switch to

3. Press SEL to toggle between AC/DC.
4. Break the circuit path to be measured, connect

the test leads across the break and apply
power.

5. Read the measured current on the display.

Measure Resistance

1. Connect the black test lead to the COM

Terminal and the test lead to the V

Terminal.

2. Turn the rotary switch to

, and the display

will show

“

”

3. Touch the probes to the desired test points of

the circuit to measure the resistance.

4. Read the measured resistance on the display.

*Do not measure current that exceeds the extremes

as indicated in the Specifications.

*Use the A mA Terminal and the

Mode when

you are measuring an unknown current. Then

switch to the

VΩHz

Terminal and the

Mode if

necessary.

*Do not input voltage at this setting.

2. Turn the rotary switch to

3. Press SEL to toggle between AC/DC.
4. Break the circuit path to be measured, connect

the test leads across the break and apply
power.

5. Read the measured current on the display.

Measure Resistance

1. Connect the black test lead to the COM

Terminal and the test lead to the V

Terminal.

2. Turn the rotary switch to

, and the display

will show

“

”

3. Touch the probes to the desired test points of

the circuit to measure the resistance.

4. Read the measured resistance on the display.

*Do not measure current that exceeds the extremes

as indicated in the Specifications.

*Use the A mA Terminal and the

Mode when

you are measuring an unknown current. Then

switch to the

VΩHz

Terminal and the

Mode if

necessary.

*Do not input voltage at this setting.

2. Turn the rotary switch to

3. Press SEL to toggle between AC/DC.
4. Break the circuit path to be measured, connect

the test leads across the break and apply
power.

5. Read the measured current on the display.

Measure Resistance

1. Connect the black test lead to the COM

Terminal and the test lead to the V

Terminal.

2. Turn the rotary switch to

, and the display

will show

“

”

3. Touch the probes to the desired test points of

the circuit to measure the resistance.

4. Read the measured resistance on the display.

*Do not measure current that exceeds the extremes

as indicated in the Specifications.

*Use the A mA Terminal and the

Mode when

you are measuring an unknown current. Then

switch to the

VΩHz

Terminal and the

Mode if

necessary.

*Do not input voltage at this setting.

2. Turn the rotary switch to

3. Press SEL to toggle between AC/DC.
4. Break the circuit path to be measured, connect

the test leads across the break and apply
power.

5. Read the measured current on the display.

Measure Resistance

1. Connect the black test lead to the COM

Terminal and the test lead to the V

Terminal.

2. Turn the rotary switch to

, and the display

will show

“

”

3. Touch the probes to the desired test points of

the circuit to measure the resistance.

4. Read the measured resistance on the display.

*Do not measure current that exceeds the extremes

as indicated in the Specifications.

*Use the A mA Terminal and the

Mode when

you are measuring an unknown current. Then

switch to the

VΩHz

Terminal and the

Mode if

necessary.

*Do not input voltage at this setting.

copyrighted

document

- all

rights

reserved

FBC

Содержание 195330000






























Результаты поиска

Содержание 195330000

Отзывы:

MW TOOLS 195330000, Руководство пользователя, Страница: 26 / 29

Результаты поиска

Содержание 195330000

Отзывы: