MVP Kool-It KCU-250-AH, Руководство пользователя

Страница: 30 / 36

30
Troubleshooting
Operational status What to check Measures
1. Ice maker does
not work
1. Is Power supplied? 1. Supply power.
2. Is the switch set to "ICE? 2. Set the switch to "ICE".
3. Is power supplied at 230 V ± 10 %?
3. Check the power and make sure to use
a dedicated 220V outlet.
2. Water is not
supplied.
1. Is water valve closed? 1. Open the water valve.
2. Is water inlet hose installed properly?
2. Check and correct if necessary.
3. Is water flowing?
3. Check the water source.
4. Is water valve working?
4. Check and contact the customer service
center.
3. The product works
but fails to make
quality ice cubes.
(Ice quality is poor
or cubes are too
large)
1. Check if the water distributor is not
clogged.
1. Remove any foreign objects from the
water distributor holes.
2. Is water flowing?
2. Remove any foreign objects from the
water supply filter. The valve must be
closed.
3. Is compressor working?
3. Check and contact the customer service
center if necessary.
4. Is the air filter dusty
and ventilation poor?
4. Clean the air filter thoroughly.
5. Is the fan motor of the condenser
running?
5. Check and contact the customer service
center if necessary.
6. Is there any heat source or heating
device around?
6. Make sure that any heat source is
as far away from the ice maker as possible.
7. Is sufficient water supplied, or does
the water trough have enough water?
7. Check water supply.Try turning off
the product and turn it back on.
4. This is not a
service issue.
1. A small amount of water flowing into the ice bin.
2. A slight vibration .
5. Ice cubes are
too cold.
1. Is the ambient temperature around
the ice maker lower than 10C? 1. Ambient temperature around the ice
maker must be higher than 10C.
2. Is the water supply sufficient?
2. Lack of water causes overcooling.
Check the amount of supplied water.
6. Ice maker is
too noisy or makes
strange noises.
1.Is the floor level,stable and/or solid
enough?
1. Make sure that the floor is completely
level.
7. Ice bin is filled
with water.
1. Is drain hose clogged?
1. Remove any foreign objects from drain
hose.
If the ice maker is not operating correctly, check the following items.
If the symptoms still persist, contact the service department.