MVP DMX-3000, Руководство пользователя

Страница: 22 / 52

Duramax Gun Operations Manual
Page | 22
13. Place new O-rings onto the catalyst and resin fittings.
14. Install both fittings into the gun, making sure they are on the correct sides of the gun head.
15. Install the needle into the needle housing and place a new O-ring onto the end sticking out of
the housing.
16. Screw the packing nut onto the needle housing over the O-ring and needle.
17. Repeat steps 15 and 16 for both needle housings.
18. Screw both assembled needle housings into the gun block, one in each side.
19. Install a new O-ring into the catalyst needle seat area of the gun head.
20. Install a new O-ring on the catalyst needle housing and thread into the gun head.
21. Insert the catalyst piston needle into the catalyst needle housing.
22. Install a seal retainer over the catalyst needle and into the catalyst needle housing.
23. Install a new packing seal over the catalyst needle and into the needle housing.