MV Heating MV Airo 4, Инструкция по эксплуатации, Страница: 32 / 48

+44 (0)23 8052 2345
32
MV Heating UK Ltd
Manual Start Up and Shut Down
For immediate start-up press the heating icon to change the standby mode
into the heating mode and the heater will start up immediately.
To adjust the heating temperature in the heating mode simply press the up or
down arrow keys.
To turn the heater off manually, simply re-press the heating icon.
Pre-setting Heating Time
During heating mode, press the ‘P’ button and the down arrow
simultaneously to start a countdown for the heating time.
Adjust the hour with the arrow keys and confirm the time with the ‘P’ button.
Then adjust the minute time again using the arrow keys and confirm again
with the ‘P’ butt on.
Note: The ‘dot’ in the upper right hand corner of the screen means the time
was set successfully. To cancel press the heating icon.
Pre-setting Starting and Heating Times
Step 1: Press the ‘P’ key in the standby mode to enter the pre -set mode.
Step 2: The time mode will appear. Adjust the hour first with the arrow keys
and press the ‘P’ when complete to move onto the minutes. You can adjust
the minutes in the same way, however ensure you press the ‘heating icon’ to
confirm (the confirmation dot will appear in the upper right hand corner of
the screen), then press the ‘P’ button to move onto the next step
Step 3: Next stage is the temperature/output stage, the two can be adjusted
by pressing the arrow keys simultaneously. The modes can then be adjusted
with the arrow keys. Once adjusted; confirm the selection by pressing the
‘heating icon’ and move onto the next step by pressing the ‘P’ button.