MV Heating MV Airo 2, Руководство по ремонту, Страница: 9 / 18

+44 (0)23 8052 2345
8
MV Heating UK Ltd
Part 1: The Case Assembly
Tools:
•
1 x Small Flat-Bladed Screwdriver
Removing the Cases:
1) Remove the heater from its installation position.
2) Remove the inlet cap ( 1:1 ) using a small flat-bladed screwdriver to
separate from bottom and top cases.
3) Remove the outlet cap ( 1:2 ) the same way.
4) Remove the top case ( 1:4 ) by sliding away from the bottom case.
5) Remove the bottom case ( 1:5 ) by pulling away from air motor lugs first.
Refitting the Cases:
1) Make sure all 4 insulating bushes ( 4:7 ) are located on the heat exchanger
( 2:1 ).
2) Replace bottom case, ensuring the air motor lugs sit inside the
appropriate holes.
3) Replace top case, ensuring that the tabs are locate inside the bottom case
correctly.
4) Refit the outlet cap, ensuring that it is orientated correctly.
5) Refit the inlet cap, ensuring that it is orientated correctly.