connect one output to the overhead amplifier and the other to a telephone system
(on-hold analog input). Note: Both outputs deliver the same audio.
Q: Can the receiver daypart?
A: Yes, the LE2 can be scheduled to daypart and can have up to 20 dayparts.
Q: Can the receiver adpart?
A: Yes.
Q: Is the Encompass LE2 analog or digital?
A: Digital.
Q: How do I select different programs?
A: Selecting the desired program is done by using the front panel controls of the LE2,
with simple-to-use Up and Down arrows.
Q: Does the LE2 come with a remote control?
A: No. The Encompass LE2 can be controlled in multiple ways:
1.
By the front panel control on the receiver
2.
By logging on to the new Encompass Control system
3.
By contacting NOC at 800.327.6549
Q: How do I authorize the LE2 receiver?
A: You can address a receiver two ways: by logging into the Encompass LE2 Control
System or by calling NOC Control at 800.327.6549.
Q: How do I post the name of the zone on the LCD screen?
A: In order to view the zoning information on the front panel LCD display simply press
the enter button. In order to have the zoning information programmed, please call
NOC at 800.327.6549.
Q: Does the receiver have a built-in amplifier?
A: No. The LE2’s output is line level and requires an external amplifier.
Q: Does the receiver have diagnostic information to assist the technician?
A: Yes, the diagnostic screen is accessed by pressing the two arrows for two seconds.
Signal strength, serial number, firmware version, stored advertising list and many
other helpful topics are available on the diagnostic screen.
Q: What size antenna is needed for the Encompass LE2?
A: Currently, the typical antenna size is a .84 meter.
