
HDMI 4K/ST2110 Over IP Uncompressed Gateway
Operation Manual
© MuxLab Inc. 2020
9
2.
Managing the 500774
The HDMI 4K/ST2110 over IP Uncompressed Gateway can be managed through
a Web interface and a RestAPI. This section describes how to set up the 500774
parameters using both the Web interface and RestAPI (Note NMOS support is
coming soon).
2.1
Web interface
Configuring the 500774 from the Web interface requires a TCP/IP connection from
the unit 1G Ethernet port (port: LAN) to your network. The 500774 default IP
address is set to DHCP. If no DHCP is available on your network, both the TX and
RX will default to a static IP Address of 192.168.168.64 for the TX, and
192.168.168.67 for the RX.
To be able to log in to the 500774 Web interface, your computer has to be in
the same subnet
.
2.1.1
Configuring the 500774-TX
This section will describe how to configure the unit using the Web interface. To
connect to the TX, open a Web browser and type the TX unit IP address. Make
sure the unit 1G Ethernet port (port: LAN) is connected to your Ethernet network.
2.1.2
Transmitter System Info Page
Once connected, the first tab is the System Info page, which displays general
product information such as the model number, firmware, FPGA version, MAC and
IP address, etc. See example below.