KVM DVI over IP PoE Extender - 500771
© MuxLab Inc. 2016
94-000846-A / SE-000846-A
Page 8
3.2 Logout from the KVM Device
To Logout, simple click on “Logout”, and the login screen will be displayed. You will be required to login,
should you wish to take control of the KVM device and connect with available workstations.
3.3 Bring up the KVM OSD Menu
To bring up the KVM OSD Menu at any time, quickly press “Scroll Lock” three times. The OSD will be
displayed.
Note that this display is generated directly from the KVM Receiver, and is not being generated by any
workstation.
3.4 Selecting a Workstation to control
If the KVM OSD Menu is not currently being displayed, then do so at this time.
Before selecting a workstation to control, it is a good practice to click on “Refresh” first, just in case a
new workstation was recently added since the last time “Refresh” was executed.
To select a workstation, click on the dropdown arrow, as shown below, to list the workstations which
are controllable via the KVM device.
Note that the list includes the following information respectively:
The Dip Switch setting selected on a given KVM Transmitter, where “CH0000” means Dip Switch
setting “0000”.
The IP address of the KVM Transmitter.
The given name for the KVM Transmitter, which is generally a name that is representative of the
attached workstation.
