KVM DVI over IP PoE Extender - 500771
© MuxLab Inc. 2016
94-000846-A / SE-000846-A
Page 3
1 Introduction
The KVM DVI over IP PoE Extender Kit allows DVI & USB equipment to be connected up to 330ft (100m)
over an Ethernet LAN, supporting 1920x1200 and 1080p resolution @ 60Hz via Cat5e/6 cable in multiple
point-to-point and point-to-multipoint configurations. The Transmitter (500771-TX) and Receiver
(500771-RX) support PoE (PD) if used with a PoE (PSE) Ethernet Switch.
The Transmitter terminates to a computer server/workstation via a DVI & USB port, The Receiver
terminates to a DVI display and up to 4 USB devices such as a keyboard, mouse, printer, drawing pad,
storage device, camera, etc., via a 4 port USB hub. A single Receiver can be switched via hotkey
sequences to any Transmitter on the network, allowing a single operator to manage numerous
servers/workstations, in a distributed KVM application.
There are two hotkey methods to switch from one workstation to another. There is a Direct Switching
Method and an On Screen Display (OSD) Switching Method. This manual explains how to control the
switching from one workstation to another, as detailed below.
Key Features:
One operator can manage multiple servers/workstations
Supports DVI up to 1920x1200 and 1080p @ 60Hz
Receiver side includes a 4-port USB hub, for KVM applications
