© MuxLab Inc.
6G-SDI Extender Over FIBER
Page 20
7.
The behavior of the Transmitter and Receiver
unit should be as outlined below during upgrade.
The device uses the SDI LEDs to indicate the
actual status.
SDI A/B/C/D Blinking: Download phase.
Clear memory space and write new
image.
SDI A Blinking: Erasing previous
programmable logic memory
SDI B Blinking: Copying programmable
logic from secondary memory to primary
memory.
SDI C Blinking: Copying firmware from
secondary memory to primary memory.
8.
Once the process is completed, the upgraded
firmware will automatically start and the SDI
A/B/C/D LEDs will cycle.
