VR-16 – short operating manual
Feb 8, 2017
2/8
Version 1.0
1
Preface
This instruction describes briefly the operation and use of the user interface.
2
Menu selections
The device is in its basic mode when the current sensor is connected and power is switched
on. Power is not supplied through the current sensor (Figure 1) or, when the current is
below the set fault limit, the display shows sensor current (Figure2).
Figure 1 Basic mode.
Figure 2 Current below set limit in basic mode.
Go to menus from the basic mode by keeping M (Menu) button pressed down. When you
keep pressing down the M button, you browse through menus at short delay intervals.
Select a menu by releasing the M button when the desired menu is displayed.
Figure 3 When the M (Menu) button is kept down, you browse between menus at a short delay interval.
Select the menu by releasing the M (Menu) button.
