Mutsy IGO, Инструкция по эксплуатации

Страница: 23 / 76

17
English
· Check that the chair has been attached
properly by trying to lift it from the
chassis. NB! The chassis cannot be
folded with the seat facing backwards!
remove the seat (q)
· Slide the unlocking buttons upwards
until you hear a click on both sides. Be
careful! The seat is now unlocked; the
red section on the chassis attachment
points are now visible. The seat can
vertically be removed from the attach-
ment points.
adjust the back support (r)
· Pull the button at the back of the seat
upwards and hold it upwards.
· The back support has 4 positions.
Place the back support in the desired
position and release the button to lock
the position.
Folding the chassis with the seat facing
forwards (s)
· Stand behind the chassis and put the
chassis on the brake. Fold the hood
back if it is folded out. Fold the seat
unit in two by tilting the back support
forwards (s1).
· Push the height adjustment button (s2)
of the pushbar in and move this to the
lowest setting. Pull the folding safe-
guard (s3) towards you on both sides
and turn the pushbar forwards until the
pushbar lies on the frame (s4).
· Pinch the chassis unlocking buttons
and fold the chassis (s5).
· The folding safeguard locks automati-
cally when the product is folded up.
· The integrated carry handle, which is
located under the rear axle, has
made lifting and carrying the folded
pushchair more practical.
· NB! The chassis cannot be folded with
the seat facing backwards!
unfolding the chassis with the seat
· Press the folding safeguard inwards
(a1) and tilt the upper chassis until the
lower support clicks into place (a2) and
move the pushbar backwards until you
hear a second click (b).
· After unfolding the seat, always push
the bumper bar to its upright posi-
tion before placing a child in the seat.
Make sure that no child is near the
bumper bar when moving it.
· Before use always check that the pram
has been unfolded and secured cor-
rectly.
adjust the leg support (t2)
· Lift the leg support to place it upwards.
· Push the buttons on both sides of the
leg support and push the leg support
downwards to lower it.
attach and remove bumper bar (t1)
· To secure the front bumper, press the
ends of the bumper into the recesses
intended for this purpose on the seat
until you hear a click.
· Press the unlock buttons on both sides
of the front of the bumper bar to re-
move the bumper bar from the chair.
The hood (u1, u2)
· Hold the front hood bar in the centre
and move it forwards or rearwards to
adjust the hood (u1)
· Open the zipper at the back of the
opened hood in order to enlarge it. Close
the zipper to again reduce the hood (u2)
· Pull the flap on the front side of the
hood outwards to additionally enlarge
the hood. Push the flap inwards to
again reduce the hood.
assemble the rain cover on the pushchair (v)
· Make sure that the hood of the seat is
in the upright position.