16
· Check the base, the edges and the car-
ry belts on the carry cot regularly for
any wear and tear.
· Make sure that the chassis has been
fully unfolded and the brake is blocked
during all actions indicated below.
Place the carry cot (k)
· Place the attachable elements on the
carry cot into the attachment points on
the chassis and press the carry cot down-
wards until you hear a click on both sides.
· Check to ensure that the red sections
on the chassis attachment points are
no longer visible. Check that the carry
cot has been installed securely by try-
ing to lift it from the chassis.
remove the carry cot (l)
· Slide the unlocking buttons upwards un-
til you hear a click on both sides. Be
careful! The carry cot is now unlocked;
the red sections on the chassis attach-
ment points are now visible. Take the
carry cot firmly by the handle on the
hood and remove it from the chassis in a
vertical movement.
The hood (m)
· The hood can be unfolded by moving it
upwards.
· Push and hold the buttons on the sides
of the hood. The hood can now be fold-
ed downwards.
assemble the rain cover on the carry cot (n)
· Make sure that the hood of the carry cot
has been unfolded.
· Place the rain cover from top to bottom
over the carry cot and make sure that
the rain cover attaches well all around
the bottom of the carry cot.
· Close the Velcro strips around both
sides of the chassis.
· Open the zipper in order to remove your
baby from the carry cot when using the
rain cover.
The seat (6 months – 15 kg / 33 lbs)
· The seat is suitable for children from 6
months up to 15 kg / 33lbs who can sit
independently.
· When in the drive position, the seat can
be folded and unfolded with the chas-
sis and does not therefore need to be
removed from the chassis.
· The back support and leg support are
adjustable.
· Make sure that the chassis has been
fully unfolded and the brake is blocked
during all actions indicated below.
Moving the seat unit to face forwards (o)
· Place the attachable elements on the
seat into the attachment points on the
chassis and press the seat downwards
until you hear a click on both sides.
NB! Place both ridges on the attach-
ment elements into the chassis attach-
ment points at the same time.
· Check that the chair has been at-
tached solidly by trying to lift it from
the chassis.
Moving the seat unit to face backwards (p)
· In order to place the seat unit so that
it is facing backwards, the attachment
elements on the seat need to be turned
by 90 degrees. Press the button (p1),
the attachment elements will unlock
and spring out. Turn the attachment
elements to the correct setting and
then click into place.
· Then place the attachable elements on
the seat into the attachment points on
the chassis and press the seat down-
wards until you hear a click on both
sides. NB! Place both ridges on the at-
tachment elements into the chassis at-
tachment points at the same time.
English
Содержание IGO
