Hydro-Park 1127 & 1123
USER MANUAL
11
MUTRADE INDUSTRIAL CORP.
4.5.5
Make the oil hose go through the
inside from the top to the bottom of
primary post. Temporarily fix the two
ends of oil hose onto the primary post by
adhesive tape or cable ties, to avoid oil
hose falling out when erecting the post.
(14) Top of primary post
4.5.6
Make the wires of limit switch, motor and solenoid valve (the thicker wire is for motor, the long one in two
thinner wires is for solenoid vale and the short one for limit switch.) go through from the hole on the top of
primary post to the wire hole above control arm. Temporarily fix the two ends of wires onto the primary post by
adhesive tape or cable ties, to avoid oil hose falling out when erecting the post.
(16) Wire holes of primary post
(15) Base of primary post
