Muton XPJ-1641SR, Руководство по эксплуатации

Страница: 86 / 166

86 Setup 17: Roll Length
Print stop menu
Sets whether or not to display “Roll Remain Error” and pause printing when the
length of the media that is counted inside the printer becomes 0.
Setting values
The media remaining count is not used to
judge for pausing printing. Printing
pauses when the rear sensor responds.
This is the initially set value.
Even when the rear sensor does not
respond, printing pauses when the media
remaining count becomes 0.
Note
• Normally you can set this as “Off” as the rear sensor detects when the roll paper is finished.
• If you are using the media that does not come off the paper core easily when it is finished, printing may not be paused when the media
is finished, if the “Print stop menu” is set to “Off”. If this happens, set this to “On”.
Near End menu
Sets whether or not to display “Roll Near End: *m” (* is replaced with a number
between 1 and 10) before the length of the media that is counted inside the
printer becomes 0.
Setting values
“Near end” is not displayed.
This is the initially set value.
“Near end” is displayed when the
remaining count for the media becomes
the length you selected.
Length:
(1 - 1500) 30 m
Print Stop:
Off
Print Stop:
On
Print Stop:
On
Near End:
Off
Near End:
Remain * m