MUTOH ValueJet VJ-1638UR, Руководство по эксплуатации

Страница: 76 / 154

76 Set 11: FrontInterlace
Note
• Normally you can set this as “Off” as the rear sensor detects when the roll paper is finished.
• If you are using the roll media that does not come off the paper core easily when it is finished, printing may not be paused when the roll media is finished,
if the “Print stop menu” is set to “Off”. If this happens, set this to “On”.
Print stop menu
Sets whether or not to display “Roll Remain Error” and pause printing when the length of
the roll media that is counted inside the printer becomes 0.
Setting values
The roll media remaining count is not used to
judge for pausing printing. Printing pauses
when the rear sensor responds.
This is the initially set value.
Even when the rear sensor does not respond,
printing pauses when the roll media remaining
count becomes 0.
Near End menu
Sets whether or not to display “Roll Near End: *m” (* is replaced with a number between
1 and 10) before the length of the roll media that is counted inside the printer becomes 0.
Setting values
“Near end” is not displayed.
This is the initially set value.
“Near end” is displayed when the remaining
count for the roll media becomes the length
you selected.
Set 11: FrontInterlace
This menu is used to set media edge treatment menu.
Setting values
<Auto> / Off
<> indicates the initial value.
Length : 30 m
Enter
Print Stop : Off
Print Stop : On
Print Stop : On
Enter
Near End : Off
Near End : Remain * m
Set 11: FrontInterlace
FrontInterlace : Auto