MUTOH ValueJet VJ-1638UR Скачать руководство пользователя страница 110

Страница: 110 / 154

110 Preparing for Daily Maintenance

Preparing for Daily Maintenance

Required Items

[1]

Prepare the following items to perform daily maintenance.

Important!

• Use a paper towel supplied with the printer or optional polyester knit wiper. DO NOT use a tissue.

Lints or flakes on tissue may cause damage to the print head.

• DO NOT use non-dedicated maintenance cleaner.

• If you want to purchase the optional maintenance cleaner, contact your local Mutoh dealer or nearest Mutoh sales office.

[2]

• Wear the rubber gloves (white) over the plastic gloves (pink).

• Wear protective goggles.

Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.

For this operation, be sure to wear the supplied gloves (or solvent resistant gloves) and goggles to prevent ink from contacting
with your eyes or skin.

Cleaning stick

Dedicated maintenance

cleaner

Dropper

Plastic cup

Paper towel

or Polyester knit wiper

Plastic gloves

Protective goggles

Rubber gloves

Scraper

CAUTION

Содержание ValueJet VJ-1638UR


























































































































































Результаты поиска

Содержание ValueJet VJ-1638UR

Отзывы:

Бренды по названию

Популярные бренды

MUTOH ValueJet VJ-1638UR, Руководство по эксплуатации

Результаты поиска

Содержание ValueJet VJ-1638UR

Отзывы:

Бренды по названию

Популярные бренды