MUTOH ValueCut VC-1300, Руководство по обслуживанию

Страница: 3 / 63

MAINTENANCE MANUAL
VCE-MM-02
3
Important Safety Information
Safety Instructions
General and Personal Safety Precautions
[PERSONAL SAFETY]
For personal safety, observe the following general precautions:

A second person should be available to disable the system in an emergency.

Wear appropriate protective gear that fits comfortably.

Do not wear loose-fitting clothes. If you are wearing a long-sleeved shirt, fold the cuffs up your
arm.

Never wear gloves close to moving parts.

Necklaces, ties and scarves should be tucked inside shirts.

Long hair should be covered.
[ELECTRICAL TOOL SAFETY]
When using Electrical Tools make sure to:

Use tools that are in good operating order. Any tool that appears electrically or mechanically
faulty must be labeled and sent immediately for repair.

Make sure that you are electrically insulated when using electrical tools. Wear rubber-soled
shoes and stand on a dry surface.

If, during the use of electrical equipment, you feel an electrical discharge (e.g. a tickling
sensation on your skin) immediately stop using that tool. Label it, and send it for repair.
[GENERAL SITE SAFETY REQUIREMENTS]

Fire extinguishers must be in working order and within easy reach.

The main power supply switch must be easily accessible.

The system site must be suitably illuminated from all sides.

Before operation, carefully read the warning labels on your Cutting plotter unit as well as the
cautions and warnings in this manual.

Connect the Cutting plotter to a properly grounded power outlet. Make sure the voltage level of
the Cutting plotter matches that of the power source.

Don't dissemble the unit while system power is on since the power supplies inside contain high
voltage.

Never leave the machine unattended during operation.

Follow the instructions on maintaining and cleaning your system. Not only will this enable you
to utilize your machine efficiently, but it will also ensure that your machine runs safely.