MUTOH Unwinder, Руководство по обслуживанию

Страница: 11 / 101

Roll systems – Maintenance Manual
11 AP-74100, Rev. 2.0, 12/01/05
2. PRODUCT OVERVIEW
2.1. INTRODUCTION
This chapter explains the features, part names and functions of the printer.
2.2 . PART NAMES AND FUNCTIONS
Part names and functions are explained below.
2.2.1. Unwinder / Winder 100
Part names and functions are explained below.
No. Name Function
1 Roll-Off System This is the device that sets the media when using roll media and feeds it to
the printing position.
2 Rear Tension system Adjust the tension of the media between the roll-off system and the media
feed slot.
3 PCB Box Contains the boards to control the unwinder / winder 100.
4 Rail Assembly Carries the roll units.
5 Motorized roll unit Supports the roll media.
6 Roll unit Supports the roll media.
7 Roll-off foot switch This switch is used to roll-up or roll-off roll media of the unwinder 100.
8 Front Tension System Adjust the tension of the media between the paper guide and the roll-up
system.
9 Roll-Up System This is the device that collects the media when using roll media.
10 Operation Panel This panel is used to set operational conditions, and the status of the product.