������������
�� � � � � � �
�� � � � � � �
�� � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
��
���������������������������������������������
1
Live, phase (brown; USA: black)
2
Protective earth (green/yellow; USA: green)
3
Neutral (blue; USA: white)
AES/EBU IN (XLR)
S/PDIF IN (Cinch)
Word Clock i/o (BNC)
APPENDIX
Pin assignment of the connectors
Mains
Replacing the mains fuse
1
Audio ground
1
Audio signal
1
Signal
2
a conductor (hot / +)
2
Audio ground
2
Ground
3
b conductor (cold / -)
Applies to input
and output!
Use a small, flat-blade screwdriver to open the compartment that houses
the fuse holder. Carefully pull out the fuse hol-der from its socket. Turn it
by 180° and re-insert it into its socket. After closing the compartment, the
second mains voltage marker must be visible through the window in the
compartment cover.
Make sure that the fuse holder is inserted completely down to the bottom
of its socket and that the compartment is fully closed!
Disconnect the power cord from both the wall
outlet and the device before you attempt to
replace the mains fuse!
12
2
1
1
2
3
2
1
1
2
3
