3
3. Installation
3.1 Inspection of Unit
Inspect the UPS upon receiving. If the UPS is apparently damaged during the shipment,
please keep the box and packing material in original form for the carrier and notify the
carrier and dealer immediately.
3.2 Unpacking the Cabinet
To unpack the system:
1. Open the outer carton and remove the accessories packaged with the cabinet.
2. Carefully lift the cabinet out of the outer carton and set it on a flat, stable surface.
3. Discard or recycle the packaging in a responsible manner, or store it for future use.
3.3 UPS Setup
All model series are designed for tower and rack purpose. They can be installed into a
19 inches equipment rack. Please follow the instruction for Tower Setup and
Rack-Mount Setup.
Tower setup
This series of UPS can be placed horizontally and vertically. As a tower configuration, it
is provided with the optional UPS stands to stabilize the UPS when the UPS is
positioned in vertical. The UPS stand must be attached to the bottom of the tower.
Use the following procedure to install UPS in UPS stands.
1. Slide down the UPS vertically and put two UPS stands at the end of the tower (Fig 1).
2.
Place down the UPS into two stands carefully (Fig 2).
3.
Pull out the LCD box and rotate it in a clockwise direction to 90 degree and then push
it back in the front panel (Fig 3).
Fig 1 Fig 2 Fig 3
Rack-mount setup
The series can be installed in 19 inches racks. Both the UPS and external battery
enclosure need 2U of valuable rack space.
Use the following procedure to install UPS in a rack.
1. Align the mounting ears with screw holes on the side of the UPS, and tighten the
screw. (Fig 4)
