Mustek PowerMust 1513S NetGuard Скачать руководство пользователя страница 13

10 

6. UPS Maintenance

 

6.1 UPS and Battery Care 

For the best preventive maintenance, keep the area around the UPS clean and dust-free. 
If the atmosphere is very dusty, clean the outside of the system with a vacuum cleaner. 
For long battery life, keep the UPS at an ambient temperature of 25°C (77°F) 

6.2 Storing the UPS and Batteries 

When  the  UPS  is  intended  to  store  for  a  long  period,  recharge  the  battery  every  6 
months by connecting the UPS to utility power. The batteries charge to 90% capacity in 
approximately  4  hours.  However,  it  is  recommended  that  the  batteries  charge  for  48 
hours after long-term storage. 

6.3 Time to Replace Batteries 

When LCD backlight turns to red, the screen displays “bTWK” and there is a continuous 
sounding, the battery may need to be replaced. Please check the battery connection or 
contact your local dealer to order new battery. 

 

WARNING:

 

 

Turn off the UPS and disconnect the utility power cord from the wall outlet. 
Servicing  should  be  performed  by  qualified  service  personnel  knowledgeable  of 
batteries and required precautions. Keep unauthorized personnel away from batteries   
Batteries  can present  a  risk  of  electrical  shock or  burn  from high  short  circuit  current. 
The following precautions should be observed: 
1. Remove watches, rings, or other metal objects. 
2. Use tools with insulated handles. 
3. Do not lay tools or metal parts on top of batteries. 
4. Wear rubber gloves and boots.   
5. Disconnect the charging source prior to connecting or disconnecting battery terminal. 

When replacing batteries, replace with the same type and number of batteries or battery 
packs. Contact your service representative to order new batteries. 
Do not dispose of battery in a fire. Batteries may explode when exposed to flame. 
Proper  disposal  of  batteries  is  required.  Refer  to  your  local  codes  for  disposal 
requirements. 
Do  not  open  or  mutilate  the  battery.  Released  toxic  electrolyte  is  harmful  to  skin  and 
eyes. 
Note: If you are not qualified service personnel to replace the battery, do not attempt to 
open the battery cabin. Please call local dealer or distributor immediately. 

 

 

Содержание PowerMust 1513S NetGuard



















Отзывы: