14
C
ONTENTS
Note: If the image color is not accurate when using the Auto mode,
try moving the camera to acclimate the Auto white balance sensor.
(6) Filters:
This feature allows you to add color imaging filters that are
applied to your images after capturing them. There are six (6)
filter modes to choose from and they appear in the following
order:
1. NORMAL: Applies no filter.
2. INVERSE: Reverses black to white and visa versa.
3. MINT: Applies light green filter.
4. ROSE: Applies pink/red filter.
5. DAISY: Applies yellow filter.
6. LILAC: Applies light purple filter.
(7) Video Record:
This feature allows you to record a video (uses 320 KB of
memory for each recording).
To activate this function:
1. Select VIDEO REC on the LCD menu, and press Enter to select
ON.
2. Press the Shutter button to start/stop recording.
3. Recording stops once 320 KB of memory has been used.
(8) Continuous Shooting:
This feature allows you to continuously capture images (up to a
maximum of 16 depending on the memory available in the camera/
memory card).
To activate this function:
1. Select CONT SHOT from the LCD menu.
2. Select the number of pictures you want to capture.
3. Press the Shutter button and images are captured into the camera.
Note: Resetting the Power during image capture will stop CONT
SHOT and return the camera to regular mode.
(9) Auto-Off:
•
Selecting No: Turns OFF LCD Display if you do not perform a
camera operation for 45 seconds, but camera power stays ON.
•
Selecting Yes: Turns OFF LCD Display if you do not perform a
camera operation for 45 seconds, turns OFF camera power if you do
not perform a camera operation for 90 seconds. To restore power to
the camera once it has been turned off, simply press the Power On/
Off button.
(10) Exposure Value:
Exposure controls the amount of light (brightness) that appears in a
captured image. The LCD menu has five exposure settings, ranging from
-2 to +2 (darker to lighter), allowing you to control the amount of light in
your images.
If your images are too:
•
bright, decrease (-) the exposure value to darken them.
•
dark, increase (+) the exposure value to lighten them.
(11) Display Brightness Control:
Allows you to adjust the brightness of the LCD display panel to
accommodate for interior or exterior lighting fluctuations.
There are 5 display settings ranging from -2 (least bright) to +2 (most
bright).
•
From the Camera menu, select DISP BRIGHT.
•
Press Enter until the desired brightness level is selected.