12
7. Now check the new yellow cap as follows (Fig. 14 for models
MD3153 and MD3154, and Fig. 14a for model MD3151):
• Is the single point status indicator showing green?
• Is the expiry date OK?
If YES is the answer to both questions, then proceed as follows. If
the answer is NO to either question, get a new cap.
8. Hold the CO
2
cylinder through the fabric of the PFD. Position the
replacement cap with the water inlet valve pointing to the right
and press firmly onto the inflator body and sealing ring (Fig. 15 for
models MD3153 and MD3154, and Fig. 16 for model MD3151).
FIGURE 15
FIGURE 16
HAMMAR
JERK
TO
INFLA
TE
HAMMAR
90˚
MD3153 AND MD3154
MD3151
