Musicam Liberty, Руководство пользователя

Страница: 17 / 44

Setup Menu
Choose [
MENU
] from the initial LCD view showing the choices [
DIAL
] MEMORY MENU.
“
Setup Menu
” is displayed at the top; this is the entry point for the menu system.
The screen provides 12 sub- menu selections:
Sub-Menu Description
01 View Config A selection of the most commonly used sub menu items, which can be
reviewed or changed.
02 Codec Setup Setup options for Codec algorithms.
03 Modem Setup Setup selections for the POTS modem. Items include auto answer,
maximum bit rate, renegotiation and retraining.
04 Dialing Setup Telephone dialing options which include number redial, status tones,
dialing pause time and prefixes
05 Unit Setup Settings for audio input sources (rear connectors), Peak program meter,
relays and country settings
06 Advanced Setup Configure local/remote control modes, port operation, quick function
setup, and Lock code setup.
07 Reset Functions Set to factory default, clear memories
08 Test Modes Loop back test, tone generator
09 Memory Setup Set up memory dialing. Store numbers & alphanumeric names.
10 Unit Details Serial number & software versions
11 Exit Setup Back to START
Sub Menus of 01 View Configuration
The View Configuration menu contains the main control settings and operating modes. Some of the same
options are also available from other sub menus and selecting them from the View Configuration menu
takes you into the appropriate sub menu. This means that should you select CLEAR from the Key Pad
you will go back one screen in whichever menu the View Configuration has taken you to (see page 18 for
a diagram of all menus).
NOTE:
Default settings in the following submenus are italicized and underlined
.
Op Mode POTS Use this mode to connect via a standard (POTS) telephone line.
Leased
Line Mode For operation over leased 2 wire bi-directional lines. As the Liberty
modem requires a loop voltage source for correct operation, an
optional line interface unit is available for use with dedicated 2 wire
circuits where the loop voltage is not present.
Telephone
Mode Use Liberty as an Emergency phone; You will need to plug
headphones into the headphone socket and a microphone into the
Mic/Line in socket. Dial the phone number on the keypad and when
finished press the
Enter/Dial
key. To finish the call, press the
Hang
Up
key.