Musicam Liberty, Руководство пользователя

Страница: 10 / 44

Liberty USERS GUIDE
9
Dialing a number
Here’s how to make a connection from one LIBERTY to another using a standard Pla ne Old Telephone
Service (POTS) telephone line. Connect the telephone line to the modular socket (RJ11) at the rear of the
LIBERTY. Switch on and wait for the self-check functions to complete.
The LIBERTY will dial the number to establish a connection with the remote Liberty at an initial attempt of
19,200 bps bit-rate. The modems measure the characteristics of the telephone line and negotiate the highest
possible stable data rate for best sound quality.
Dialing From An Office or Hotel Room
Most hotels and offices require dialing an additional digit(s) followed by a pause to gain access to an outside
line. After entering the access number hold the “#” key until a comma (“,”) appears after the access number
on the LCD display. Now enter the rest of the telephone number. A two second pause has now been inserted
after the access digit to allow time for the outside line to be set up for dialing. The length of this pause can
be changed in the “View Config” menu.
Handset Dialing
An external telephone handset can be used to dial a number. This may be necessary if unusual telephone
system conditions cause problems with the LIBERTY dialer. Connect a telephone to the “Handset” modular
connector on the rear panel of the LIBERTY. Using the
MENU NAVIGATION KNOB
scroll to [DIAL]
then click
MENU NAVIGATION KNOB
to select. Then follow the steps below:
* If the remote LIBERTY used a handset to answer the call, the remote LIBERTY user must press the Answer
key in order to connect with the modem.
-
POTS CODEC MODE-
1234567890
Vol: Local
[DIAL] MEMORY MENU
Enter the telephone number of
remote Liberty using the keypad.
The number appears here.
Then Press
=
Enter Number:
Ctl: Local
[DIAL] MEMORY MENU
-POTS MODE -
1234567890
Ctl: Local
DIAL [H-SET]
Modem Init…
Dial External Phone,
Quickly hit ENTER &
Hang -up. (See Manual)
CLEAR to EXIT
MENU NAVIGATION KNOB Select
[H-SET] and dial the number on the
phone
When the called unit answers;
immediately press “Enter” on the
keypad & hang-up the handset*
ENTER
DIAL