M6SCD issue 1
Page 12 of
19
When the disc has reached the end of the required section, press the
A / B
button again, to display
and the unit continuously plays the selected part of the disc in this case, the segment of track 1 from 34
seconds to 1 minute 55 seconds. To cancel A-B repeat mode, press
A / B
on the remote control.
SHUFFLE PLAYBACK
The SHUFFLE feature allows tracks on the discs to be played in random sequence rather than the normal
consecutive order.
Tracks are also played in a different order each time the disc is restarted, or another disc loaded. This function
is obtained by pressing
SHUFFLE
on the remote control with the unit either stopped or playing. If the M6SCD is
already playing, play will continue in random order until all tracks on the disc have been played.
Shuffle play is cancelled by pressing the
SHUFFLE
button a second time. The unit resumes normal play
function, continuing to the end of the disc in normal order starting from wherever it was left by the previous
random selection.
From stop mode, pressing
PLAY/PAUSE
also begins shuffle play.
SCAN INTRODUCTION
The scan-introduction function allows play back of just the start of each track on the disc, for instance to locate a
preferred track by ear.
Press
INTRO
on the remote control, and if the player has stopped, the display will show
The first ten seconds (approximately) of each track on the CD can then be played in sequence by pressing
either
PLAY/PAUSE
on the front panel, or
PLAY
on the remote control.
Press
INTRO
again to cancel introduction search mode. If
INTRO
mode is cancelled while the M6SCD is still
playing, the remainder of the entire disc will be played.
PROGRAMMED PLAY
The built-in program memory allows you to store up to 99 track numbers and then play them back in the
programmed order. Each track is stored as a “step” in the program.
With the CD loaded and the player stopped, first press
PROGRAM
on the remote control.
On the remote control, press the numeric button corresponding to the track number of the first track to be stored
(number 3 for example). That track number will now appear in the display:
Press
PROGRAM
again on the remote control - the next program step is selected,
(program 2)
and the
program number increases, ready for a new entry, with blank track number.
Continue entering track numbers in the same way up to a maximum of 30.
If at any time you wish to add a track to the list, press the
CLEAR
button to obtain the next step number.
Alternatively, to delete a previous entry, press
CLEAR
a second time to remove the last entry. Repeated
pressing of
CLEAR
will then erase each step in reverse order. So to delete an entire program sequence from
the memory, press
CLEAR
repeatedly until “
program 1
” is shown in the display.
STOP. 74
program stp 02 trk 00
STOP. 74
program stp 01 trk 00
STOP. 74
program stp 01 trk 03
PLAY scan 1
PLAY 1 1:55
repeat a-b
PLAY 1 0:34
shuffle disc
OPERATION
