Musical Fidelity M6SCD, Инструкция по эксплуатации

Страница: 17 / 19

M6SCD issue 1 Page 17 of 19
Output
Output impedance 50 ohms balanced or single ended
Output, digital 0dB level XLR output - 4.4V R.M.S. balanced nominal
RCA output - 2.2V R.M.S. single ended nominal
DAC (
balanced and single-ended outputs)
DAC circuit 32 bit Delta-Sigma (bit stream) dual differential 8x over-sampling
Total correlated jitter <135 picoseconds peak to peak
Linearity <0.1dB down to -96dB
Frequency response 10Hz to 20 kHz -0.2dB max.
Channel separation >105dB 20 Hz to 20 kHz
Signal-to-noise ratio >117dB “a”- wtd.
Total harmonic distortion <0.003% 10Hz to 20 kHz
Connections
Line level outputs 1 pair line level RCA connectors, left and right outputs
1 pair line level XLR connectors, left and right outputs
Digital outputs 1 RCA coaxial SP/DIF up to 24 bit 192 kHz
1 optical SP/DIF up to 24 bit 96 kHz
Digital inputs 2 RCA coaxial SPDIF up to 24 bit 192 kHz
2 optical SP/DIF up to 24 bit 96 kHz
USB type “B” up to 24 bit 96 kHz asynchronous
Trigger input 3.5mm ( ⅛ ”) mono jack ±4.5 to ±15V DC
Trigger output 3.5mm ( ⅛ ”) mono jack +12V DC
Power requirement
Mains voltages 90-250VAC 50-60Hz universal
Power Consumption 20 Watts maximum (blue PWR LED lit)
Less than 0.5W in standby (orange STBY LED lit)
Weight
Unit only, unboxed 11.2 kg (24 ⅔ lbs)
In shipping carton 15.5 kg (34 lbs)
Dimensions
Wide 440 mm (17 ⅓ ”)
High, including feet 125 mm (5”)
Deep (front to back) including terminals 385 mm (15 ⅛ ”)
Standard accessories
IEC type mains lead (10-Amp type)
M6 remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
SPECIFICATIONS