TROUBLESHOOTING
issue 1/12.07.2000
Basic troubleshooting of the HT600 is similar to troubleshooting of any other electrical or elec-
tronic equipment. Always check the most obvious possible causes first. In our experience most
problems are caused by incorrect, faulty or not properly connected interconnects. Please check
all these first. To give you a few other ideas of what to look for, please check the following:-
HT600 5 Channel power amplifier Instructions for Use. Page 6 of 7
ALL 5 Blue LEDs do not light,
Power cord disconnected,
Re-connect.
Mains switch switched off,
Switch on.
One of the Blue LEDs does not light,
Unit has a fault
Switch off and refer back to you dealer.
Sound is not precise, lacking in bass
and stereo image
Speakers are connected out of phase
Make sure that all speakers are connected
correctly.
If none of these actions effect a cure, please contact your dealer, or an authorised Musical Fidelity service agent.
Remember, never open the case of the HT600 5 Channel power amplifier yourself, as this will invalidate the guar-
antee.
