HT600 5 Channel power amplifier Instructions for Use. Page 5 of 7
CONNECTIONS
Before switching on your amplifier system please read carefully the instructions on the follow-
ing pages.
INPUT CONNECTIONS
All connections should be made with the power OFF.
The HT600 power amplifier can be used with any preamplifier or any line level source which
has a volume control. We highly recommend the matching HTP Home Theatre Processor avail-
able from Musical Fidelity.
Connect the Left and Right front outputs, Left and Right surround outputs and the centre chan-
nel output from your HTP or other preamplifier to the phono inputs on the back panel of the
HT600. For the best results we recommend that you use either Musical Fidelity X-LINX "no-
nonsense" interconnect cables for this connection or the highly rated Nu-Vista interconnects
with integral RFI suppression. Various lengths are available in the Nu-Vista interconnect range.
Please contact your local dealer for more information.
OUTPUT CONNECTIONS
All connections should be made with the power OFF.
Connect your loudspeakers to the loudspeaker terminals situated on the back panel marked as
Left, Right, Left Surround, Right Surround and Centre Loudspeaker Outputs. Ensure the polar-
ity of each speaker is observed when connecting the speaker leads.
Once these connections are made, plug in the IEC type mains lead and switch on the unit.
WARNING
THE HT600 POWER AMP IS A POWERFUL AMPLIFIER AND IS
DESIGNED TO SUPPLY HIGH VOLTAGES AND HIGH CURRENTS
THROUGH THE LOUDSPEAKER TERMINALS. THEREFORE TO AVOID
ANY POSSIBILITY OF AN ELECTRIC SHOCK DO NOT TOUCH THE
SPEAKER TERMINALS WHEN THE UNIT IS BEING USED.
issue 1/12.07.2000
