Instructions For Use. Page 7
F25
CONNECTIONS
REMOTE CONTROL
The battery powered handheld remote control will perform the following func-
tions:
a.
Mute
b.
Volume c/-
c
Input selection
The mute control operates the output relay. When this control is used, the
output is muted and the dual colour LED in the volume control knob turns red.
When the mute button is pressed again, the output is unmuted and the LED turns
back to green.
The select and volume function buttons are self explanatory.
F25 LEDS
The F25 has three types of LED on the front panel:
a.
Mains on/off (green)
b.
Input indicator (red)
c.
Status indicator (dual colour: red and green)
The on/off indicator is self explanatory. When the unit is switched on, the LED
is on.
The input status indicator similarly. The LED above the input selected illumi-
nates.
The dual colour LED in the volume control knob is slightly more complex. It
has two functions. When switched on, it indicates the output relay status. Red for a
few seconds, then when the relay is open it turns green. There will be no output
from the F25 until this LED is green. The second function of the dual colour LED in
the volume control knob is to indicate mute status. When you press the mute button
on the remote control the F25 will mute and the LED will change to red. It will
remain this way until you press the mute button again when it turns back to green.
BALANCED/SINGLE ENDED OUTPUT MODE
The F25 can provide a balanced or a single ended out put. Simply plug your
leads into the XLR sockets for balanced operation, or plug your RCA phono leads
into the RCA phono sockets for single ended operation.
MUTE FUNCTION
The F25 remote control has a mute function. This cuts the output from the F25.
If, by mistake, you touch the mute button, there will be no output from the F25 and
you might think it has gone wrong. It hasn’t! Just press the mute button again until
the status LED turns green.
