Instructions For Use. Page 3
F25
þ
Heed all warnings on the back of
the unit.
þ
þ
Place your F25 where there is
adequate ventilation.
þ
þ
Only connect the unit to a power
supply of the type marked on the back
of the unit.
þ
þ
Position the power supply lead
and signal interconnect leads where
they are not likely to be walked on or
trapped by items placed on them.
þ
þ
Fit 2 x “AA” size batteries into
the remote control. These must be
alkaline types. Please observe the
correct polarity of + and - when fit-
ting.
ý
ý
Do not use near water.
ý
ý
Do not place the preamplifier
near direct heat sources such as radia-
tors or other equipment that produces
heat.
ý
ý
Do not remove any covers or try
to gain access to the inside. The war-
ranty will be invalid if the unit has
been tampered with. There are no
user adjustments within. Refer all
service work to an authorised Musical
Fidelity agent.
ý
ý
There are 3 fuses in the F25. In
the unlikely event that one blows, take
your F25 to your audio dealer. Do
NOT try to replace the fuse yourself
or you will invalidate the warranty.
BEFORE YOU SWITCH ON
You should make all connections to the F25 before switching on.
Follow this routine before you listen for the first time, and each time you
change any connections.
1
Check all the inputs and outputs to the F25.
2
Then check again.
3
Turn the volume control to nil.
4
Now you can switch on the power and carefully advance the volume to
the level you want and enjoy the music.
INSTALLATION
INSTALLATION PRECAUTIONS
Your new F25 is designed and built to provide trouble-free performance but it
is necessary to observe a few precautions. Please ensure that you have complied with
them before you connect any AC power to your amplifier. Retain this guide for
future reference.
