Parameters Explanations
If during playback of a song, the parameters edited become effective
at once.
TEMPO
You can temporarily change the tempo of a song while playback is in
progress. The song returns to its preset tempo when a different song
is selected.
T-Sig
Only for information reference, it cannot be changed.
Mode
1. Each Song has its own mode as default.
2. If current song is the type of Loop/1Shot, the parameter can be
changed and the modification takes effect at real time; if current
song is the type of TAP/HIT, the parameter can't be changed.
Pre Count
You can have a count sound (click) inserted before playback of a
song begins.
0: Playback begins without a count-in.
1: Playback begins after a 1-measure count-in.
2: Playback begins after a 2-measure count-in.
Note:
This menu item is available only the song type is not TAP/ HIT.
Kit Link
ON: While selecting song, the kit selection would be changed
according to the kit selection of the drum part of current song.
-During playback of a song, the function will be become effective
at once while switched from “OFF” to “ON”.
-If you want to change some other kit for your performance, you
can simply enter Kit mode to select a new kit.
OFF: While you are selecting songs, the kit selection won't be
changed with the songs.
Note:
This menu item is available only the song type is not TAP/ HIT.
Tap Sync
In Tap and HIT playback, if one sound is set to play before the
previous sound has finished playing, this setting allows you to either
have the previous sound stop and the subsequent sound start
playing or have the two sounds layered.
ON: The previous sound continues to play to the end, while the
subsequent sound is superimposed on it.
OFF: The previous sound stops while in progress, and the
subsequent sound starts playing.
Note:
This menu item is available only the song type is not TAP/ HIT.
20
Song
C
M
Y
CM
MY
CY
CMY
K
Fame_DD-one_ Manual_003_150727.pdf 20 2015/8/7 12:00:47
